Key Specifications/Special Features:

Support Ethernet 10/100 Based-T communication

Support protocol Modbus/TCP,TCP/IP,UDP,ICMP,ARP

Support 8*DI (Direct/Counter/Freq/Latch)& 8*DO(Direct/Pulse/Delay Width)

Support Counter(Filter/Signal Width-H/L)/Frequency(Value Select)/Latch(H/L) inputs

isolated input/output channel

1KHz Pulsed(Freq/Width-H/L/Counts)/Delay(H-L/L-H Width) output

Support Dry/Wet contact Digital input type

Support P-MOSFET(open drain) Digital output

Isolated voltage 3000VDC

EX9000-MTCP series Utility/Software/Command/Web Server Support:

     ● Utility of EX9000-MTCP
     ● TCPDAQ(Ethernet I/O) ActiveX Control
     ● TCPDAQ(Ethernet I/O)DLL API
     ● TCPDAQ(Ethernet I/O)Data Structure
     ● ASCII Command
     ● MODBUS Command
     ● Web Server

Specifications:

 

Interface:
Communication	10/100 Based-T Ethernet
Protocol	Modbus/TCP, TCP/IP, UDP, ICMP and ARP
Led indication	Led for power and Ethernet link status
Isolation voltage	3000VDC
Digital Input:
Input channels	8
Input type:	Dry/Wet contact       ● logic level 0: close to ground / 0~2VDC       ● logic level 1: open / 5~30VDC
Counter/Frequency/Latch	Each channel supports 1KHz counter/frequency & Latch input Counter:       ● Filter Enable/Disable       ● Minimun Signal Width Low/High Selectable       ● 4,294,967,285(32 bit)Counts Freq.: 1Khz & Freq. Value Selectable Latch: Input Latch Low/High Selectable
Digital Output:
Output channels	8
type	P-MOSFET (open drain) up to 30V/1A max load
Pulse output	Each channel supports 1KHz pulse output Pulse Freq. Selectable Signal Width Low/High Selectable Pulse Counts/Countinue Selectable
H-L/L-H delay	Each channel supports high to low or low to high delay Width output
Power requirement:
Consumption	2.0W
Power input	10~30VDC (unregulated)