|
EX9050-MTCP |
|
12 Input & 6 output Isolated channels with ModbusTCP module |
|
Key
Specifications/Special Features:
Support Ethernet 10/100 Based-T communication
Support protocol Modbus/TCP,TCP/IP,UDP,ICMP,ARP
Support 12*DI (Direct/Counter/Freq/Latch)
Support Counter(Filter/Signal Width-H/L)/Frequency(Value
Select)/Latch(H/L) inputs
Support Wet contact Digital input type
Support 6*DO digital output(open collector)channels
1KHz Pulsed(Freq/Width-H/L/Counts)/Delay(H-L/L-H Width) output
Support Isolated input and output channels
EX9000-MTCP series Utility/Software/Command/Web Server Support:
●
Utility of EX9000-MTCP
●
TCPDAQ(Ethernet I/O) ActiveX Control
●
TCPDAQ(Ethernet I/O)DLL API
●
TCPDAQ(Ethernet I/O)Data Structure
●
ASCII Command
●
MODBUS Command
●
Web Server
Specifications:
Interface: |
|
Communication |
10/100 Based-T
Ethernet |
|
Protocol |
Modbus/TCP,
TCP/IP, UDP, ICMP and ARP |
|
Led indication |
Led for power
and Ethernet link status |
|
Isolation
voltage |
3000VDC |
|
Digital Input: |
|
Input channels |
12 |
|
Input type: |
Wet contact
●
logic level 0: close to ground
●
logic level 1: open |
|
Counter/Frequency/Latch |
Each channel
supports 1KHz counter/frequency & Latch input
Counter:
●
Filter Enable/Disable
●
Minimum Signal Width
Low/High Selectable
●
4,294,967,285(32 bit)Counts
Freq.: 1Khz & Freq. Value Selectable
Latch: Input Latch Low/High Selectable |
|
Digital Output: |
|
Output channels |
6 |
|
type |
Open collector
to (NPN) up to 30V/500mA max load |
|
Pulse output |
Each channel
supports 1KHz pulse output
Pulse Freq. Selectable
Signal Width Low/High Selectable
Pulse Counts/Continue Selectable |
|
H-L/L-H delay |
Each channel
supports high to low or low to high delay Width output |
|
Power requirement: |
|
Consumption |
2.0W |
|
Power input |
10~30VDC
(unregulated) |
|
|
|
|
|
|