EX9000 series
EX9000-MTCP series
EX9188/Modbus series
EX9188E/MTCP series
Micro PLC series
EX-Cloud
Fiber series
ZigBee series
Simple gateway series
Panel/Box PC & Monitor
Monitor series
Tablet series
Industrial switch hub
POE series
Linux system series
PCI/e I/O card series
Embedded board series
ExpertDAQ system
Power supply series
Software series
Simple gateway series/Serial to Wi-Fi series
EX9486C-W
 
       
    User manual  
    Driver
     Search utility
     Virtual com
 
       
       
       
       
 
       
Serial TO Wireless LAN
 

Key Specifications/Special Features:

 
WLAN

     ● Atheros Chip Set
     ● Standard Compliance: IEEE 802.11b/g
     ● Spread Spectrum Technology: DSSS, OFDM
     ● Tx Power 11b: Maximum 20 dBm
     ● Tx Power 11g: Maximum 18 dBm
     ● Rx Sensitivity: -70 dBm @ 54 Mbps, -85 dBm @ 11Mbps
     ● Transmission Rate: 54 Mbps (max.) with auto fallback (54,48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps)
     ● Transmission distance: Up to 100 meters(@12 Mbps, in open areas)
     ● Security: WEP 64-bit/128-bit data encryption, AES, WPA2
     ● Antenna Connector: Reverse SMA , 2 dBi Antenna
     ● Network Mode: Infrastructure, Ad-Hoc LAN ( for configuration / Ethernet hub )

Ethernet


     ● 10/100 Mbps, RJ45
     ● Protection: Built-in 1.5 KV magnetic isolation

Serial

     ● No. of ports: 1 * RS-232/422/485 port, male DB9, S/W selectable
     ● RS-232 Signals: TxD, RxD, GND
     ● RS-422 Signal : Tx+ , Tx- , Rx+ , Rx – ( Surge Protect )
vRS-485 Signal : Data+ , Data- ( Surge Protect )
     ● Serial Line Protection: 15 KV ESD for all signals
     ● Serial Communication Parameters
     ● Parity: None, Even, Odd, Space, Mark
     ● Data bits: 5, 6, 7, 8
     ● Stop bits: 1, 1.5, 2
     ● Flow control: RTS/CTS, XON/XOFF
     ● Speed: 110 bps to 115.2+ Kbps

Power Requirements


     ● Power input 1: 12 VDC 1.5 A

Environmental
     ● Operating Temperature: -10 to 70°C (32 to 131°F), 5 to 95% RH
     ● Storage Temperature:-20 to 85°C (-4 to 185°F), 5 to 95%RH

Regulatory Approvals
     ● RoHS
     ● EMC: FCC Class A, CE Class A

Software Features
     ● Protocols: ICMP, IP, TCP, UDP, DHCP, BootP, ARP / RARP, Telnet, RTelnet, DNS, SNMP MIB II, HTTP, SMTP, SNTP
     ● Serial mode: Virtual Com / TCP Server / TCP Client / UDP / Serial Tunnel with advanced settings of TCP Alive Check Timeout
     ● Inactivity Timeout
     ● Delimiter for Data Packing
     ● Force TX Timeout for Data Packing
     ● 4 Hosts simultaneous connection: Virtual Com / TCP server / TCP Client (only raw data)
     ● Security: HTTPS, SSH v2
     ● Event notification by email / SNMP trap
     ● SNMP Trap
     ● Cold/Warm Start
     ● DSR, DCD Changed
     ● IP Changed
     ● Authentication Fail
     ● SNMP Response
     ● System MIB,
     ● Interface MIB,
     ● ICMP, IP, TCP MIB
     ● UDP MIB
     ● RS-232 MIB
     ● Utilities: Windows NT/2000/XP/2003/VISTA
     ● Device discovery
     ● Auto IP report
     ● Device setting (run-time change, no rebooting)
     ● Access control list
     ● Group setting
     ● Device monitoring
     ● Serial port monitoring
     ● Log info
     ● Group Firmware update batch
     ● Virtual COM/TTY Drivers (WDM mode, configuration in windows device manager): Windows NT/2000/XP/2003, VISTA

 

 

TOPSCCC Technology Co., Ltd

Nei-Hu Taipei 5F No 12 Lane 345 Yang Kuang St Nei Hu Taipei Taiwan
Tel: +886-2-27999080 Fax: +886-2-26575516 / 26585042
E-Mail: topsccc@topsccc.com

Global | Europe | Germany | Italy | Netherlands | BeNeLux | Ukraine | Norway | United Kingdom | South Africa
RS-422 / RS-485 Converter | RS-422 / RS-485 Repeater | I/O RS-485 Modules | I/O Modbus Modules | Embedded | PCI-Series | Industry PC | Industrial Touch Display
Copyright 1987-2011 TOPSCCC Products Co., Ltd. All Rights Reserved