Key Specifications/Special Features:

■ Advanced Wireless DIO/RS232/RS485 controlled Extend Box

■ Wireless Networking Read

■ Plug & Play, Easy to use

■ Easy NC Command

■ NO APP needed

Specification:

 

Build in Multiple Cluster, Repeater Topology Wireless IO-Set Networking
Alternate Route/Path Transmission
Low Cost for Each Node, Definable Master/Slaver/Node
Max 23 Levels, no. of Slave at Level n is (2^(23-n)-2)
315/433/868/915/950MHz UHF ISM Predefined Frequency Band, Multi-Channels
Transmit Power	+10dBm ~ +20dBm, Auto RF Power Output Adjustment Mode
Receive Sensitivity	-115 dBm
Excellent Wireless Communication over Distance, Long Range ~2Km @Open Area
Up to 128Kbps Data Transmission Rate
On Module High Performance CPU with DSP instruction; DSP Lib Available
Power Management by Sleeping Mode, Idle Mode and Power Down Mode
Wake Up from RF Signal
Build In Chip Antenna or External Antenna
Encryption by user defined key words
1x UART and 1x RS485 Port
Optional 1xUSB for Host Connection
Remote Controllable 4xOpto-DI and 4xOpto-DO
4x Programmable LED
Build In ADC Voltage Detection
NC Command Set for Configures, Data and Data Stream, no programming needed, through UART or USB
Wide range 6Vdc~30Vdc Input Voltage
Very Low Power Rx <30mA ; Tx <45mA
Dimension: 75 mm x 63mm x 23mm
-20 to +80C temperature range

Application:

■ Factory Automation