Key Specifications/Special Features:

Feature:

■ 32-bit PCI-Bus, Plug and Play, complies with PCI local bus Rev 2.1

■ 8-CH 12-bit voltage output

■ Fully isolation protection from PC power to external device

■ 2500Vrms isolation voltage

■ Unipolar or bipolar voltage output range

■ Current output available on PCI-93008A,

■ On board DC-to-DC converter provide voltage and current source

■ 8 Isolated digital input channels

■ 8 Isolated digital output channels

Specification:
■ Voltage Output

Numbers of channel: 8 channel for PCI-96308V and PCI-96308A

Converter: DAC2815AP or equivalent

Conversion type: Monolithic multiplying

Resolution: 12-bit no missing code (11-bit guarantee)

Voltage output range: (jumper selectable) Bipolar:±10V,Unipolar: 0~10V

Voltage output range: Bipolar:±10V,Unipolar: 0~10V

User defined unipolar: 0~ user defined voltage.

Voltage output driving capability:±5mA min.

Settling time: 16 m second (-10V to +10V)

DA update time: 90 m second for four channels simultaneously

Gain error:±0.2 % (max, without trimming)

Differential Linearity Error:±0.002 % Full Scale Range

Data Transfer: Programmed I/O

Isolation voltage: 2500Vrms (photo isolation PC9D10)

Output initial status: 0V (after RESET or POWER-ON)
■ Digital Input

Numbers of digital input channel: 8 isolated input channel

Photo isolator: PC814 or equivalent

Isolation voltage: 5000Vrms

Input voltage: up to 34VDC (Logic "L": 0~3.0V, Logic "H": 3.2~34V) 

Input resistance: 4.7KW @ 0.5W

■ Digital output

Numbers of digital output channel: 8 isolated output channel

Photo isolator: PC817 or equivalent

Isolation voltage: 5000Vrms

Output type: Photo-coupler, open collector up to 35VDCup to 34VDC 

Sink current: 50mA maximum

■ Operating temperature :0° C~55° C

■ Storage temperature:-20° C~80° C

■ Humidity: 5 ~95% non-condensing

■ Connector: 37-pin D-sub connector (female)

■ Bus interface: 32-bit slave PCI bus

■ Power consumption: +5VDC @ 220mA typical/+12VDC @175mAtypical

■ PCB Dimension: Half-sized 172 mm x 105 mm