Key Specifications/Special Features:

Support Modbus/TCP,TCP/IP, UDP, ICMP, ARP

Ethernet 10/100 Based-T Communication

Support 3 relay ch. (RL 1/Form A, RL2/3 Form C)

Provide Pulsed/delay Output Mode

Support 5 Isolated digital Input Channels

Provide Counter/Frequency Inputs Mode

Support Dry/ Wet Contact Inputs

Fully Photo-Isolation 3750Vrms

Status LED indicator

EX9000-MTCP series Utility/Software/Command/Web Server Support:

     ● Utility of EX9000-MTCP
     ● TCPDAQ(Ethernet I/O) ActiveX Control
     ● TCPDAQ(Ethernet I/O)DLL API
     ● TCPDAQ(Ethernet I/O)Data Structure
     ● ASCII Command
     ● MODBUS Command
     ● Web Server

Specifications:

 

Interface:
Communication	10/100 Based-T Ethernet
Protocol	Modbus/TCP, TCP/IP, UDP, ICMP and ARP
Led indication	Led for power and Ethernet link status
Isolation voltage	3750Vrms
Digital Input:
Input channels	5
Input type:	single ended with common source/ ground Dry contact :      ● logic level 1 (inactive) : open      ● logic level 0 (active): Close to GND Wet contact :      ● logic level 0 (inactive) : +2VDC max      ● logic level 1 (active): +4V to 30VDC max Logic level status can be inversed via ASCII/Modbus command
Counter Input	500Hz counter input (32-bit+1-bit overflow)
Digital Output:
Output channels	3 Relay output
Relay type	RL1/Form A, RL2/3 Form C
Relay contact rating	0.6A/125Vac, 2A/30Vdc
Surge Strength	500V
Operate Time	3mS max
Release Time	2mS max
Min Life	5*10 ops
Pulse output	Each channel supports 500Hz pulse output
Power requirement:
Consumption	1.8W
Power input	10~30VDC (unregulated)
Humidity	5~95% RH, non-condensing