EX9000 series
EX9000-MTCP series
EX9188/Modbus series
EX9188E/MTCP series
Micro PLC series
EX-Cloud
Fiber series
ZigBee series
Simple gateway series
Panel/Box PC & Monitor
Monitor series
Tablet series
Industrial switch hub
POE series
Linux system series
PCI/e I/O card series
Embedded board series
ExpertDAQ system
Power supply series
Software series
EX9000-MTCP series
EX9053-MTCP
 
       
    User manual  
    Driver
    
9000-MTCP Utility
    
Demo for DLL & ActiveX
 
    Pin assignment  
    Block diagram  
    Wire-connection  
       
12 Input & 4 output(NPN) channels with ModbusTCP module
 

Key Specifications/Special Features:

 

Support Modbus/TCP,TCP/IP, UDP, ICMP, ARP

Ethernet 10/100 Based-T Communication

Support 4 Isolated digital output channels(NPN).

Provide Pulsed/delay Output Mode

Support 12 Isolated digital Input Channels

Provide Counter/Frequency Inputs Mode

Support Dry/ Wet Contact Inputs

Fully Photo-Isolation 3750Vrms

Status LED indicator

EX9000-MTCP series Utility/Software/Command/Web Server Support:

     ● Utility of EX9000-MTCP
     ● TCPDAQ(Ethernet I/O) ActiveX Control
     ● TCPDAQ(Ethernet I/O)DLL API
     ● TCPDAQ(Ethernet I/O)Data Structure
     ● ASCII Command
     ● MODBUS Command
     ● Web Server

 

 

Specifications:

 
Interface:  
Communication 10/100 Based-T Ethernet  
Protocol Modbus/TCP, TCP/IP, UDP, ICMP and ARP  
Led indication Led for power and Ethernet link status  
Isolation voltage 3750Vrms  
Digital Input:  
Input channels 12  
Input type: Dry/Wet contact
logic level 0: close to ground / 0~2VDC
logic level 1: open / 5~30VDC
 
Counter/Frequency/Latch single ended with common source/ ground
Dry contact :
      ● logic level 1 (inactive) : open
      ● logic level 0 (active): Close to GND
Wet contact :
      ● logic level 0 (inactive) : +2VDC max
      ● logic level 1 (active): +10V to 50VDC max
Logic level status can be inversed via ASCII/Modbus command
 
Counter Input 500Hz counter input (32-bit+1-bit overflow)  
Digital Output:  
Output channels 8  
type isolated open collector (NPN) w/pin of EXT.PWR
Open Collector to +5~30V / 500 mA max load
Logic level status can be inversed via ASCII/Modbus command
 
Pulse output Each channel supports 500Hz pulse output  
Power requirement:  
Consumption 1.8W  
Power input 10~30VDC (unregulated)  
Humidity 5~95% RH, non-condensing  

 
 

TOPSCCC Technology Co., Ltd

Nei-Hu Taipei 5F No 12 Lane 345 Yang Kuang St Nei Hu Taipei Taiwan
Tel: +886-2-27999080 Fax: +886-2-26575516 / 26585042
E-Mail: topsccc@topsccc.com

Global | Europe | Germany | Italy | Netherlands | BeNeLux | Ukraine | Norway | United Kingdom | South Africa
RS-422 / RS-485 Converter | RS-422 / RS-485 Repeater | I/O RS-485 Modules | I/O Modbus Modules | Embedded | PCI-Series | Industry PC | Industrial Touch Display
Copyright 1987-2011 TOPSCCC Products Co., Ltd. All Rights Reserved